EB-4 s3 Pro Buggy Car

Product code: TT 6230K20

Thunder Tiger

Quick Overview

 Innovative engineering enabled the low center of gravity. Combine with high performance suspension to create transition on any track. Along with the help of a manual with computer generated drawings and helpful pro tips; you will have no problem assembling this masterpiece

614,95 €

EB-4 s3 Pro Buggy Car

More Views


The new EB-4 S3 buggy car is the culminating result from extensive engineering and tremendous research and development by the Thunder Tiger Design Team.
 Length: 496mm / 19.5 in.
 Width: 305mm / 12 in.
 Height: 180mm / 7.08 in.
 Wheelbase: 320mm ~ 330mm
 FR/RR Track: 295mm ~ 305mm/300mm
 Weight: 3340 g. / 7.4 lbs.

Introducing features such as an extruded chassis; the most rigid ever, shocks that are placed in between the upper arms; keeping the shocks away from front damage in case of crash, single fiber discs at the front and rear of the center differential, oversized shock shafts match the current 3.5mm-thick shafts used on the best buggies in the market. Achieving the super low center of gravity, and a new radical engineering of a car construction. Features

* A7075-T6 front/rear shock tower and steering slider
* Front A-arm with adjustable Pillow-Ball suspension
* AB (Anti-Bumping) shocks with 3.5mm shafts provide various damping and rebounding
* Ultra long, light weight suspension arms
* Small transmission bulkheads with gasket
* Front shocks are protected behind the shock tower and mounted through the upper A-arm
* Graphite front brace, radio tray and center diff top plate
* Unique Delta-Box machined hardened chassis provides more rigidity than a conventional stamped chassis
* Heavy duty CVD universal drive trains (Front/Center/Rear)
* Enclosed radio box protects receiver and batteries from any foreign elements
* Laid down steering servo for low center of gravity
* Complete set of rubber-sealed ball bearings
* Fully adjustable Toe, Caster and Ackerman
* Captured hinge pins no E CLIPS needed,also prevents binding of suspension components

  Accessories Needed

* Radio Set - 2 Channel radio, x2 High Torque servos, Receiver and battery pack.
* Engine - .21 rear exhaust engine, Glow Fuel (20%), Glow starter, Air filter oil.
* Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Threat locking glue.
* Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers,
  Wire cutter, Needle nose pliers, Lexan cutter/Scissors, Silicon oil.



Additional Information

Manufacturer Thunder Tiger

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Memory usage: real: 34865152, emalloc: 34390928
Code ProfilerTimeCntEmallocRealMem