Details
Brushless speed control Esc 40A from Thunder Tiger corp.Suitable for electric airplanes - helicopters
Item No. 8041TW-H
Specification Voltage Range(V) 7.4~14.8 V (2~4S Li-Po)
Internal resistance(mΩ) 0.0048Ω
Continuous Load(A) 40A
BEC Voltage(V) 5V
BEC Current(A) 2A
Motor Limit
Reverse
Reverse Limit (sec)
Over Load Protection Temp. Protection
Low Battery Cutoff
Setup Procedure Digital
Governor Mode Yes
Rec.Model
Dimension (mm) 52 x 24 x 7.9
Weight (g/oz.) 27 /0.95
Rec.vehicle
Content
1) Brushless Speed Controller x 1
2) Golden Plug set (φ4mm/ femal & male) x 2
3) Instruction Manaul
Introduction
Thunder Tiger introduces their brand NEW speed controls for brushless motors. The BLC-40 is designed for the mini-sized electric aero-vehicle.
Capable of supplying up to 40 Amps of continuous motor current. Small and lightweight, with a large heat sink surface area. Perfect for the Thunder Tiger OBL series brushless motors. And for safety consideration. there are built-in safety features to prevent accidental motor startup when powering on.
There are 2 version of the BLC-40 speed controller can be choosed to fit the difference model. The only difference is on the factory default setting program. BLC-40A is set for the aircraft model and BLC-40H is set for the helicopter.
Features
1) Low battery protection 2) Over temperature protection 3) Motor timing adjustment 4) Brake control 5) Throttle response adjusment 6) Plane and helicopter mode 7) Governor mode for helicopter 8) Soft start 9) Anti-interference ring
Additional Information
Manufacturer | Thunder Tiger |
---|