EB-4 G3 Brushless buggy blue color

Product code: TT6400F082

Thunder Tiger
423,41 €

Availability: Out of stock


EB-4 G3 1:8 Brushless Buggy
Item No.     6400-F
[Buggy-1x8-01] [Off-road] [4wd-shaft] [2.4GHz] [ESC_brushless02] [ESC_in_brushless] [RTR]
Specification Wheelbase(mm / in.)     320mm(min)/330mm(max)
Weight(g/ lbs.)     3160g
Length(mm / in.)     490mm
Width(mm / in.)     305mm
Height(mm / in.)     180mm
Ground Clearance(mm / in.)      
Drive train/Pulley ratio     12.7:1
Motor     2000KV Brushless Motor

 Pre-Assembled Chassis

 Pre-Printed Hi-Flow Dynamic Body

 ACE RC 1:8 Car Blushless Power System

 Cougar 2.4GHz 3-CH LCD Transmitter and micro receiver

 8kg/cm Metal Gear Steering Servo

 L Hex Wrench Set

 Cross Wrench for Changing Wheels

Required For Operation:

 AA- Batteries x8 for transmitter

 2S- 1P Lipo with deans plugs 1 or 2 packs

 3S-4S 1P Lipo with deans plugs 1 pack only*

 Proper charger for proper type of battery

Green Shock!
The EB4 G3 is regarded as a brand new buggy platform from the ground up, evolutionally including some outstanding features, such as well weight distributions, compact chassis brace unit and excellent handling characteristics.


 Suspension Based On National ROAR Champion- EB4 S3
* Compatible with most EB4 S3 series parts
* Heavy Duty Steel Diff Ring/ Pinion
* Adjustable Steel Turnbuckles
* Compact Molded Chassis Brace And Cover
* New Hi-Flow Dynamic Body
* CNC Machined Aluminum Motor Mount
* CNC Machined Steel Pinion Gear
* Equipped Front/Center CVD Drive Shafts
* ACE RC Brushless Power System for 1:8 Scale Car
* Center Drive Shaft Guard For Cable Protection
* High Current Super Deans Plugs Included
* Anodized Aluminum Oil-Filled Shocks
* 17mm Aluminum Wheel Hubs
* Rear, Center and Front Fluid Filled Differentials
* S2008MG Metal Gear High Torque Servo For Steering

Ready Set- The new EB4 G3 is offered in a completely ready to go form. All components are pre-assembled, all you have to do is to add your battery packs of choice for the club’s smack down. The EB4 G3 comes equipped with an ACE RC BLC-80C race spec ESC and super torque 2000KV motor combo, front and center CVD universals, all fluid filled differentials, 17mm wheel hubs to mach up its powerful output.

Transmission- The front and rear transmission of EB4 G3 is the same as the ROAR national champion, the nitro EB4 S3, which comes equipped with a hardened steel differential rings that makes stripping a gear a barely mission impossible. All the diffs contain a full set of steel diff gears and diff fluid inside in combination with full set of bearings throughout the drive train to ensure the most smooth power transmission.

Suspension- The front and rear suspension uses the same race proven composite nylon suspension arms as the nitro EB4 S3. The shock bodies are made of anodized aluminum with quick adjustment clips for ease of changes. The shock towers are made from 4mm thick aluminum plate with multiple shock mounting positions and the whole chassis is strongly stiffened with a compact molded chassis brace and cover. You can also fine tune for the optimal camber and toe setting with adjustable turnbuckles and suspension blocks for your demanding cornering and overall handling.

Brushless Power- The power system is equipped with a powerful 80A ESC and a 2000KV super brushless motor that will give EB4 G3 super fast speed and huge torque. But the most important thing is that the ACE RC brushless power system enables you a longer play time due to less friction in the brushless motor comparing to other RTRs. Other multiple protection features, like low voltage cut-off protection, over-heat protection, throttle signal loss protection, motor blocked protection and splash/dust proof cover are just making the ESC bullet-proof.

IBL40/20 Powerful B/L Motor:
*Outer Diameter: 40mm
*Length: 74mm
*2000 KV
*Continuous Current: 75A Peak Currenty: 150A
*5mm Heavy Duty Shaft

BLC-80C Performance ESC:
-Output: Continuous current 80A, burst current 380A.
-Input: 6-12 cells NiMH/NiCd (3300mAh or higher) or 2-4 cells LiPo.
-BEC Output: 5.75V/3A (Switch mode built-in BEC).
-Resistance: 0.0006 Ohm.
-Motor Supported: Sensorless brushless motors
-Suitable Brushless Motor:
When working with 4 cells Lipo: >= 6.0T (KV<=2400)
The above T number is based on the value of a 4074 sized motor
(Diameter=40mm, Length=74mm)
- Suitable Car: 1/8 Buggy / Truggy.
- Size: 58mm(L) * 46.5mm(W) * 35mm(H).
- Weight: 105g(Without wires)

Additional Information

Manufacturer Thunder Tiger

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Memory usage: real: 34603008, emalloc: 34042512
Code ProfilerTimeCntEmallocRealMem