PROFI mc 4000 SYNTH TX Set w.scanner 40/41MHz     #45922
   
PROFI mc 4000 – the amazing transmitter for amazing models
The PROFI mc 4000 has been the showpiece of the MULTIPLEX
range of transmitters for more than ten years. The experience
which we gained with the PROFI mc 3030, a system
which has gained almost legendary status, was exploited to the
full in the development of this transmitter. Here are just a few of
its features:

• Plain text menus (many languages available)

• Logically arranged menu structure

• Free assignment of transmitter controls, switches and servos

• Many pre-defi ned mixers, ready for use


Describing all the capabilities of this transmitter within a catalogue
is simply not possible. We have therefore decided to concentrate
on just a few of the many expansions and additional
features which make the PROFI mc 4000 one of the world’s
most powerful transmitters, and explain them in greater detail.

• Free assignment of transmitter controls and switches

- 12 proportional controls can be connected

- 12 switches can be connected

- standard equipment:

2 dual-axis sticks

2 proportional controls

2 three-position switches

4 two-position switches


• Free servo assignment

- 12 servos full-value channels equal speed (full transmission speed)


• Virtually unlimited mixer and adjustment facilities

- free mixers with two to eight inputs, can be cascaded

- for each mixer input there are:

3 to 13 curve points SLOW function: 0 to 25 seconds freely selectable switches (or permanently ON)


• Comprehensive timer functions

- 5 freely programmable timers per model

- lap timer with 99 lap time memories


• Ample model memory space

25 to 100 models, depending on complexity


• Flight modes

Up to fi ve fl ight modes per model, with variable transition (0.1 - 10 seconds).

• Plenty of help for “everyday fl ying”:

- Pre-programmed base types, ready for use with power models, gliders, helicopters, boats and cars

- Auto-trim trim settings are automatically stored when you switch flight modes

- Servo monitor simultaneously shows the servo travels on-screen for all functions

• Scanner with Channel-Check

The whole frequency band can be scanned and the results displayed on-screen in bar graph form.
To use Channel-Check (power-on guard) you first use the menu to select the channel to be checked.
If “your” channel is already in use, a warning appears on the screen, and the RF module remains switched off.

A few details of the PROFI mc 4000

• Twelve channels

All twelve channels are of equal value, equally fast and have the same resolution; there are no restrictions on channels 10

- 12. All the PROFI mc 4000’s mixer and adjustment facilities can be applied in full to these channels. The transmitter is switchable to cope with 7-, 9- and 12-channel receivers,
which means that the transmitter can be used with all older MPX receivers as well as the latest types.


• Five flight modes

Five different flight modes are available for fixed-wing model aircraft and helicopters. A smooth transition can be set when switching from one to another; the period is variable
within the range 0 to 10 seconds.


• Fixed-wing model settings

The following prepared mixers are available:

• elevator and V-tail with compensation inputs

• flaperon, butterfly (crow), snap-flap, Quadro

• delta / flying wing

• Helicopter settings

The following functions are available:

• swashplate with mechanical mixers

• 3-point swashplate with 120° linkage

• 4-point swashplate with 90° linkage

• Heim system

• collective pitch curve

• virtual swashplate rotation

• flare

• tail rotor mixer (Revo-Mix)

• throttle curve with limiter and direct throttle

All curves can be set up using 3 - 13 points. Graphic screen displays make it easy to set curves correctly.

Contents:

1 PROFI mc 4000 transmitter with 6/3000 mAh NiMH battery

1 HFM3-SYNTH Synthesizer RF module

Specification – PROFI mc 4000

Transmission mode: FM/PPM, 10 kHz spacing

No. of channels: 12

Model memories: 25 – 100 (depending on model type)

Servo signal format: MULTIPLEX or UNI (switchable)

Power supply: 6 cells NiMH, sub-C size

Current drain: approx. 200/450 mA (excl. / incl. RF)

LCD backlight: approx. 200 mA additional current

Weight: approx. 1500 g (incl. battery)

Dimensions (L x W x H): 220 x 240 x 80 mm

Specification – PROFI CAR

Transmission mode PPM, 10 kHz spacing

with crystal RF module AM- oder FM

with Synthesizer RF module FM

Servo channels 3/4/5/7 according to type / model

Servo signal format MPX/UNI switchable

UNI 1,5 +/- 0,5 ms (100% servo travel)

MPX 1,6 +/- 0,55ms (100% servo travel)

Power supply 6 Zellen NiMH, Mignon (AA)

Current drain approx. 190 mA

Weight approx. 570 g (incl. battery)

Dimensions (L x W x Y) 185 x 120 x 195 mm