Details
CSM - Smart Carb
Smart carb Works off a temp sensor placed in cylinder head and operates via a servo connected to main needle. No extra RX channel needed - just power supply via Y-lead etc.Controls fuel mixture by monitoring cylinder head temperature.
Simplifies mixture adjustment.
**Helps protect engine **
Makes mixture less critical to weather changes.
Allows higher, more consistent, power output.
Requires a servo and linkage for use,
does not require a radio channel.
CarbSmart is used in conjunction with a servo connected to the main needle of the carburettor to adjust the mixture in flight dependant on the cylinder head temperature.
The unit has a user selectable target temperature. When the head is below the target temperature the unit moves the mixture towards the leaner direction.
The extent to which this is allowed is again user adjustable.
As the head reaches the target temperature the mixture is richened to the standard setting and as the head temperature exceeds the target value the mixture continues to richen until a user adjustable limit is reached.
The gain of the system is also user adjustable.
Full adjustable Gain, full lean - Centre / Failsafe - Full Rich servo positions. 90 - 125 degrees C operating range. 100c for running in. 110 for maximum service life of engine. 115c for max power
Please note: the Smart Carb supply must not be plugged into the battery/DSC port on your RX, please us a spare channel or Y-lead
Kit includes:
Temp sensor
Smart Carb unit
Mounting foams
Engine needle bracket
Power lead
Additional Information
| Manufacturer | CSM |
|---|
